DESCRIPTION

SEAL COAT SF150 is a CLASS 3 two-component, specially designed, hyper-elastic waterproofing system of a cement base, mixed with a specially formulated polymer emulsion. SEAL COAT SF150 presents excellent bonding and elongation characteristics, which make it an ideal solution for surface waterproofing under temperature variations, crack bearing and moving surfaces (dynamic behavior). Can be used in conjunction with PENETRON® crystalline integral waterproofing system for combined protection.

APPLICATIONS

SEAL COAT SF150 is designed to be used to deal with temperature variations and is appropriate for: Balconies and terraces exposed to open conditions or to be coated with ceramic tiles, marble, natural stone or roof tiles Concrete walls with medium, positive or negative, hydrostatic pressure Tanks and water reservoirs Fountains Surfaces undergoing expansion and contraction

ADVANTAGES

• Easy mixing and application (by brush) UV stable
• Pre-measured mixing ratios
• No water permeability
• High elongation capacity
• Excellent elastic behavior
• Excellent flexibility
• Excellent bonding on properly prepared surface Water vapor permeability. The concrete is able to “breath”
• Retains its properties under extreme weather conditions
• Excellent resistance to freezing conditions up to -19°C
• Resistance to expansion and contraction Excellent crack bridging properties between (1 and 2 mm)
• Non-toxic. Non-solvent

COVERAGE

SEAL COAT SF150 coverage is 1.4 kg/m². Do not exceed 1mm per layer or 1.4 kg/m², as cracks are expected to form in its structure. Two layers of 0.7kg/m2 per coat are usually recommended for low and medium demands, and three layers for high waterproofing demands. If fiberglass mesh is used between layers of SEAL COAT SF150, the total coating thickness will be at least 2-3 mm. Coverage depends on the roughness of the substrate and the waterproofin