Product Finder

Find Your Ideal Product

I. Balconies, Decks, Patios & Terraces

Choosing the right waterproofing membrane for outdoor areas isn’t as easy as one would first imagine.

One must first determine whether the membrane will be exposed to UV or topped with something like tiles or a UV stable trafficable coating as well as what the substrate will be, such as fibre cement sheet or concrete.

When in doubt, always use a product with the highest elasticity and UV resistance.

Our suppliers recommend the following products for outdoor areas :

BRANDUV STABLENOT UV STABLE
Construction ChemicalsLiquid Flash 1Liquid Flash 2
DuramMultithane UVRMultithane STD
Multithane HV
GripsetGripset LS Roof Coat
Gripset RD
Gripset P39
Gripset 38FC
Gripset 2P
MapeiMapelastic SmartMapelastic Smart
The WaterStop ShopBluProof

II .Bathrooms & showers

The most important aspects of choosing an appropriate bathroom waterproofing products for use inside a bathroom and/or shower are elasticity and longevity.

Low VOC content is also very important and it is for this reason that most manufacturers specifically recommend the use of water based products for indoor use.

Our suppliers recommend the following products for use in these critical areas.

 
SupplierProduct
Construction ChemicalsLiquid Flash 1
Liquid Flash 2
GripsetGripset 38FC
MapeiMapelastic Smart
The WaterStop ShopBluProof

III. Ponds, Water features, Swimming pools & Spa's

The most important factor for choosing a waterproofing product for use in a permanently immersed environment is ensuring that it doesn’t re-emulsify due to long term exposure to water.

The other factor to note is that when dealing with ponds and/or water features, one must ensure that the waterproofing product used is UV stable if it is left exposed to the elements.

Our suppliers recommend the following products for use in these critical areas.

SupplierUV ExposedUV Non-Exposed
Construction ChemicalsLiquid Flash 2
Liquid Flash 2PondsealCrystoflex
GripsetGripset 51 Bitumen RubberGripset 2P
MapeiMapelastic SmartMapelastic Smart

IV. Retaining & Basement walls, Planter boxes & Underground car parks

In terms of waterproofing areas that will be permanently below ground, it is vital to choose a waterproof membrane that will provide adequate, long term protection.

Our suppliers recommend the following products for use in below ground applications:

SupplierRecommended Product/s
Construction ChemicalsLiquid Flash 2
DuramBituflex
Crystoflex
Multithane HV (Solvent Based)
GripsetGripset 51
Gripset 59
Gripset 2P
Gripset C-1P
MapeiMapelastic Smart
Plastimul
The WaterStop ShopBluproof
TremcoPabkote 3 / 5

V. Concrete Additives & Bonding Agents

Most concrete additives can also be used as bonding agents. Put enough concrete additive/bonding agent into a concrete or screed mix, and you’ll end up making it highly water-resistant as well as durable, tough and give it the ability to feather edge in some cases.

Our suppliers recommend the following products as concrete additives/bonding agents:

SupplierConcrete AdditiveBonding Agent
CementaidEverdure Caltite
3CC
Construction ChemicalsAcrybondAcrybond
GripsetGripset 11YGripset 11Y
MapeiPlanicretePlanicrete

VI .Penetrating Damp, Rising Damp & Negative Waterproofing

There is a distinct difference between penetrating damp and rising damp, and it is important to identify if the problem is as a result of water ingress through an unprotected wall/floor or as a result of a failed damp course.

In the case of penetrating damp, if at all possible, do the work externally (see our section on retaining walls/basement walls, etc). But if external work is not possible and/or practical, then working from the inside (negative waterproofing) may be the only way to go.

Our suppliers recommend the following products for these two very common issues:

Supplier Penetrating Damp / Negative WaterproofingRising Damp
Construction ChemicalsEpecrete
Crystal Sealer
Damp Cure
Epecrete
GripsetC-1PC-1P
MapeiIdrosilex Pronto
Mapelastic Foundation
Idrosilex Pronto
Mapelastic Foundation

VII. Floor coatings, Floor levelling & Driveway coatings

When choosing a waterproofing product as a finished flooring surface for your particular job, ensure that you fully understand the specific purpose of the particular product you’ve chosen to work with, as not all flooring products are designed to be used in every situation. So it is important to get the right advice if in doubt.

Our suppliers recommend the following products for the following types of floor work:

SupplierFloor CoatingsFloor LevellingDriveway Coatings
CementaidLB9
Wet Look Slate Sealer
Diamite
Rokite
Level Floor Standard
Level Floor Tuff
Level Floor V15
Construction ChemicalsEpecreteLevel Floor Standard
Level Floor Tuff
Level Floor V15
Driveway Stain

VIII. Penetrative sealers & waterproofers

There are many penetrative sealers in the market, both water based and solvent based that purport to prevent water from ingressing through porous substrates. It is however prudent to choose a penetrative sealer that not only works as described but also has excellent longevity.

It is also important to identify that the particular sealer that you have chosen is suitable for the substrate that you want to seal.

Note also that most penetrative sealers will make a substrate water resistant and/or repellent, but they will not make a substrate waterproof, and there are only a handful of actual penetrative waterproofing sealers on the market.

Our suppliers recommend the following penetrative sealers/waterproofers:

Supplier Penetrative SealerPenetrative Waterproofer
CementaidDriwal P6 (Solvent)
Construction ChemicalsSealcote (Water)
Natural Sealer (Solvent)
Micro Seal (Solvent)
DuracoreMoisture Proof
Densicrete
Protect CreteMoisture-Fix 1
Densi-Proof
Product was successfully added to your cart!
[contact-form-7 id="5b28251" title="Got A A"]